Tile + Adhesive

Each case is 12sf of Slate-ish tile and one tube of adhesive.

Want more info on adhesive? Click HERE

A clean, flat interior wall surface.
See full Installation Instructions

Tools:
Caulking gun
Tape measure
Pencil
Painter’s tape
Saw (Miter or Jig saw)
Paper towels
Level

Measure in inches.

Length x Width divided by 144 = square feet.

If you have windows or other areas that you want to remove from the square footage above, measure these openings, use the same formula, and subtract it from your total.

No need to order extra - simply round up to the nearest case quantity!

If in doubt, we’re happy to help you confirm your numbers. You can email us for assistance.

Slate-ish can be installed on any dry, interior wall. You don’t need anything special - just install over painted sheetrock! So much easier than heavy natural stone.

No.
Water doesn’t hurt Slate-ish, but we recommend dry, interior locations only. See more info about WATER here.

See our Applications page for where it can be used!

Slate-ish is handmade in Lincoln, Nebraska by Josh and Jen.

Slate-ish is made to order. Our lead time is usually 4-8 days, plus transit. SOOT can have an extended lead time of up to 4 weeks.

We are a family owned business, and when we are in production, it’s literally all-hands-on-deck, there’s no one available to answer the phone.
We’ve found it’s better to use email. When you contact us, you will get a reply from Jen or Josh, the founders and daily makers of Slate-ish!

Questions about design, coverage, application, shipping or samples? jen@slate-ish.com

Questions about installation, wholesale accounts, technical details or crazy ideas? josh@slate-ish.com

If you need a phone call - we’re happy to schedule one! Just drop Jen a line.

Tile size: 1.5” x up to 12”
Most tiles are 11-12”

Tile thickness: 80% of tile - 1/16” to 1/4”. 20% are 1/4” to 3/8”

Weight: Approximately 1.25lbs/sf